Contact Us

Atten:Coco Wang


Fax:+86 0317 8188613


Z purlin roll forming machine

current location: 主页 > Product > cz prulin roll forming machine >

time:2016-12-23 15:48

Z purlin roll  forming machine

Z Profile Roll Forming Machine

Z-beam machine is a set of rollers to produce a variety of specifications Z purlin roll forming machine finished single.It consists of passive loading rack, leveling device, punching device, after forming cutting device, hydraulic station, computer control systems. This machine adopts automatic flying saw punching, easy to operate features.Z section steel rolling machine equipment of Z-beam bending finished with good pressure performance good flatness, automatic fixed-length cutting, automatic punching, high degree of automation, quick and easy installation. Products can be used as the main medium-sized industrial buildings by the force structures, such as factories, warehouses, machine garage, hangars, exhibition halls, theaters, stadiums, fairs load bearing roof garden sheds and wall level support. Cold-formed steel is the main material for the production of light steel structure, the use of steel or steel roll forming steel.



The profile drawing:


  The thickness of Material: 2-3mm,The width is from 100mm-300mm  

Working flow:

Passive Uncoiler—Feeding—Leveling-- roll forming --hydraulic cut to length—output table

Component of equipment

Manual uncoiler

Capacity (Max): 5MT

Manual inner expanding
Coil Width(Max.): 500mm


2) Roll forming system (one machine for four sizes)

Main motor power: 18.5kw

Drive: Chain

Main shaft dia: 85mm,   material: 45 steel refined forge steel

Roller material: GCr15 bearing steel, quenching HRC58-62,surface coated chrome with thickness 0.05mm

Roll station: 16stations with 7 leveling rollers

Raw material: Black steel or galvanized steel

Thickness of raw material: 2-3mm

Working speed: about 7-15m/min(include cutting time)

Coder: OMROM

PLC: 380V 50HZ(Depend on customer)

Computer operating panel: touching screen


Cutting system

Hydraulic cutting

Four sets of the cutting mould to replace for different size

Hydraulic power: 5.5KW

Hydraulic pressure: 20Mpa

Blade material: Cr12mov, quenched 58°-62°

Equipment list:





5MT Manual uncoiler



Roll forming machine(include feeding, , Leveling, PLC computer, hydraulic cutting)



Output table(freely)






Tel/Whatsapp:+86 18231737651





On-line On-line