Contact Us

Atten:Coco Wang

Tel:0086-18231737651

Fax:+86 0317 8188613

E-mail:formingmachine@rgcbe.com

Skype:coco.wang105

Fully automatic C & Z channel purline forming machine

current location: 主页 > Product > cz prulin roll forming machine >

time:2016-12-30 14:31 source:www.rgcbe.com

automatic c z channel purline forming machine,,  fully automatic, computer operated rollforming machine for different open profiles (purlines), such as U-, C-, Z- and  diverse widths and forms. The width adjustment of the rolls for profiling of purlins with diverse widths proceeds infinitely, using just one profilling unit. Cassette type design implies the production of different profile forms by changing the cassettes with their different profiling units. Through the integrated flying punching machine required assembly holes can be made during the production process.

automatic c z channel purline forming machine,, stud machine has the following advantages:

1) The products produced by these series c z channel purline forming machine,, stud machine is used for light steel keel in building. These products will be used for hold ceiling and wall panel.

2) It is with the advantage of lower cost, soon fixture. This series products are common used in different ranges.

3) The width and height are adjustable.

4)Different models for optional: U shape track,C shape stud,V shape keel or W shape keel.

 
Processing material: galvanized plate, or aluminum plate

Material thickness: 0.4---0.8mm

Material hardness: 195 mpa---350 mpa

Step length:150mm---380mm(adjustable)

Forming speed: 20m/min

 

 

Uncoiler

 

Usage:It is used to support the steel coil and uncoil it in a turnable way.

Passive uncoil pulled by roll forming system

 Loading capacity:1.5T

Uncoiling width:300mm

Inner diameter: 450-550mm

 

Entry Beach

Usage:Put the raw material(steel plate) through the beach to manufacture and process,it can guarantee that the products are neat, parallel and everything is uniformity.Please refer to the equipment regulation to know the function of locate angle iron.

 

Length of the main part:about 3000*800*1400mm

Weight of main part:3T

Voltage:380V/50HZ 3Phase

Roller fixer:middle plate

Frame:350H steel

Drive mode:chain or gear

Material of rollers:45#steel, surface hard chromium plating.

Material of shafts:45#steel

Diameter of shafts: φ 40mm

Number of rollers: 10 rollers

Main power:3kw

Material of mould:Cr12 quenched

Power supply:hydraulic power

 

cutting device

 

Usage: It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

Material of blades: Cr12 quenched

Power supply : hydraulic power

Components:It contains one set of blade, one hydraulic tank and one cutter machine.

Power:3kw



Name:




E-mail:




Message:


 

On-line On-line